PT100 Probe 12 Inch Length
- 100 Ohm Class A Platinum Element (PT100)
- Temperature Coefficient, α = 0.00385.
- 304 Stainless Steel Sheath
- Rugged Transition Junction with Strain Relief
- Probe Length - 6 Inches (152 mm) or 12 Inches (305mm)
- Probe Diameter 1/8 inch (3 mm)
- Three Wire 72 Inch (1.8m) Lead Wire Terminating in Spade Lugs
- Temperature Rating : 660°F (350°C)
The PT100-11 series are RTD probes with stainless steel sheath and 100 ohm platinum RTD element. The PT100-11 are available with 6 or 12 inch probe length. These probes features a 3mm diameter sheath constructed from 304 stainless steel, a heavy duty transition joint which connects the probe to the lead wires and 72 inches of lead wire terminating in color coded spade lugs. A Class A sensor element is used to provide high accuracy measurements.
The PT100-11 probe is well suited for industrial environments. RTDs are resistance based sensors so electrical noise has a minimum effect on the signal quality. The three wire lead design compensates for the lead wire resistance allowing longer wire runs without a significant impact on accuracy. The rugged transition joint with spring wire strain relief makes for a highly mechanically sound connection between the wire and the probe.
|
To Order - To order click on the model number (or scroll to the top of the page and choose the desired options from the drop down menus) then ADD TO CART |
| Model | Description |
PT100-11-3-18-6-72-SL |
PT100-11 series RTD probe with 6 inch probe length |
| PT100-11-3-18-12-72-SL |
PT100-11 series RTD probe with 12 inch probe length |
| Downloads |
| PT100-11 Data Sheet |
SPECIFICATIONS
Temperature Rating: -60 to 660° (-50 to 350°F)
Probe Sheath Material: 304 Stainless Steel
Probe Diameter: 1/8 inch (3mm)
Probe Length: 6 Inches (152 mm) or 12 Inches (305mm)
Lead Wire: 3 wire, 72 inches
Lead Wire Insulation: Teflon
Lead Wire Termination: Spade lugs