FMT-22 Portable Transit Time Ultrasonic Flow Meter

• FREE Delivery!
  
• Accuracy 1% of Reading at Rates >0.2 MPS
• 0.2% Repeatability
• Built-In Data Logger
• Includes Transducers for Small and Medium Sized Pipes
• RS232 Output
• 4 Flow Totalizers
• 100 Pico-Second Resolution of Time Measurement

The FMT-22 is a high-quality transit time ultrasonic flow meter used to measure liquid flow in a full or closed pipe. The meter is designed with ease of operation, high accuracy and outstanding reliability. The software is very user friendly. The FMT-22 employs a patented technology which minimizes electrical interference so that the meter will work properly even in demanding industrial environments.

Theory of Operation
The FMT-22 uses two transmitters that function as both an ultrasonic transmitter and receiver. The transducers are clamped on the outside of a pipe at a specific distance from one another. The flow meter operates by alternately transmitting and receiving a modulated burst of sound energy between the transducers and measuring the transit time it takes for the sound to travel between the transducers.  The difference in transit time measured is directly and exactly related to the velocity of liquid in the pipe.

Best Used with Relatively Clean Liquids with Full Pipes
For proper operation the flow meter requires a full pipe.  Also, since the flow meter measures flow rate by transmitting an ultrasonic signal between the two transducers, particulates in the liquid can obstruct the signal and impact the accuracy of the measurement.  Applications with liquids containing less than 50ppm of particulates 50 microns or less in diameter are typically good applications for this transit time flow meter.  If your liquid contains higher amounts of particulates, please contact us and we will be happy to discuss your application.

Battery or AC Powered
The FMT-22 is powered by a rechargeable NI-H battery which will provide over 10 hours of operation. It also includes an AC power adapter for continuous operation.

Built in Data Logger and RS232 Interface
The built-in data logger can store 2,000 lines of data or the data can be sent directly to a computer or PLC via the RS232 interface.

A Complete System - Out of the Box Operation
The FMT-22 comes as a complete flow measurement system so you can start working right out of the box. It includes a small and medium size transducer for measuring pipes from 1 inch to 28 inches.   Accessories included with the FMT-22 are:

• 1 set of transducers for small pipe sizes (1" to 4")
• 1 set of transducers for medium pipe sizes (2" to 28")
• Acoustic Gel
• Power Adapter
• 2 five meter transducer cables
• Protective rubber boot for meter
• Tape Measure
• Attachment straps
• RS232 Interface Cable
• User Manual
• Factory Calibration Certificate
• Aluminum Carrying Case

SPECIFICATIONS

Accuracy: +/-1% of reading at rates >0.2mps
Linearity: 0.5%
Repeatability: 0.2%
Response Time: 0-999 seconds, user configurable
Fluid Velocity: up to 32 m/s, bidirectional
Temperature Range: -30 to 90°C with standard transducers, up to 160°C with optional high temperature transducers.

* Schedule 40 pipe
** Minimum flow is the lowest flow rate for which the FMT-22 will read flow at the rated accuracy.

Liquid Types: Direct entry for water, salt(sea) water,  kerosene, gasoline, fuel oil, crude oil, liquid propane, butane, diesel oil, castor oil, peanut oil, alcohol, other liquids supported by entering sound speed and viscosity.
Pipe size: Includes one pair of transducers for small pipe size(1" to 4") and one pair for medium pipe sizes(4" to 28").  Please contact IOThrifty if needed to use with larger pipes sizes.
Pipe Material: Standard entry for Carbon steel, Stainless Steel, Cast Iron, Ductile Iron, Copper, PVC, Aluminum, Fiberglass-epoxy, other pipes by entering material sound speed
Transducer Temperature Rating: -30 to 90°C(optional high temperature (-30 to 160°C) transducers available.
Rate Units:  meter, feet, cubic meter, liter, cubic feet, USA gallon, Imperial gallon, Oil barrel, USA liquid barrel, Imperial liquid barrel, million USA gallons. User configurable
4 Flow Totalizers: 7-digit totals for net, positive and negative flow respectively
Security: set-up values modification lockout. Access code needs unlocking
Display: English and Chinese
Communication Interface: RS232C, baud rate from 75-57600
Transducer Cable Length: 5m
Data Logger: Built-in data logger can store over 2000 lines of data
Power Supply: 3 AAA Ni-H built-in batteries. When fully charged FMT-22 will last over 10 hours of operation
Manual Totalizer: 7-digit press-key-to-go totalizer for calibration
Housing Material: ABS, IP65
Case Size: 100 x 66 x 20mm
Meter weight: 1.2 lbs (514g) with batteries