LogBox-AA - Data Logger with Two Universal Analog Input Channels

• Two Universal Input: Pt100, Thermocouples (types J, K, T, E, N, R, S or B), Voltage (0 to 50 mV or 0 to 10 V), or Current (0 to 20 mA or 4 to 20 mA)
  
• Easily Programmed via a Handy Infrared IRLink3 Interface Connected to a USB Port Under Windows® Software
  
• IP65(Dust Tight)/ IP67(Water Tight) Enclosures
• Accuracy: 0.2% of Full Scale for Pt100, Current and Voltage; 0.25% of Full Scale ±3 °C for T/C's Type R, S and B; 0.25% of Full Scale ±1°C for all other Thermocouples
• Launch Options: Immediate, Programmed Time and Date
• Stop Options: When Full, at a Certain Time, after a Number of Readings, or Wrap Around (Overwrites First Readings)
• Internal Button and External Signal Input for Stop/Go
• Memory for 64,000 Recordings in One Channel or 32,000 Recordings for each Channel
• Infrared Communication Up to 1 Meter Away
• Recording Interval: Programmable from 1 s to 18 Hours
• Built in Real Time Clock
• Estimated Battery Life: 200 Days with One Weekly Download and 5 Minutes Measuring Interval. Battery Life Depends Heavily on Data Retrieval Frequency
• Switching Circuit for Powering Remote Transducers (Only in IP65 Version)

LogBox-AA is an electronic data logger with two input analog channels. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.

Universal Input
The LogBox-AA features dual universal multi-sensor inputs, individually programmable for Pt100, Thermocouples (types J, K, T, E, N, R, S or B), voltage (0 to 50 mV or 0 to 10 V), or current (0 to 20 mA or 4 to 20 mA).

Configuration and Visualization Software
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software.

Power Saving
The LogBox-AA provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.

The LogBox-AA-IP67 is available but the LogBox-AA-IP65 is on temporary hold because of parts shortages.