Answer
May 06, 2024 - 12:56 PM
The TL-400-I includes an industry standard M12 connector which provides connection to the power and 4-20mA output signal. In order to power the TL-400-I and access the 4-20mA output you will need either our connector and cable or provide you own.
The TL-400-I is a laser style sensor so it will need a hole in the top of the tank for the beam to pass. The dimensions of the required hole can be found in the user manual and data sheet on the TL-400-I product page.
You can program an offset into the TL-400-I
Please feel free to contact us directly either through chat, email or telephone if you have any more questions about your application.
The TL-400-I is a laser style sensor so it will need a hole in the top of the tank for the beam to pass. The dimensions of the required hole can be found in the user manual and data sheet on the TL-400-I product page.
You can program an offset into the TL-400-I
Please feel free to contact us directly either through chat, email or telephone if you have any more questions about your application.
